Q*Bert Bootleg 
--------------

Single layer pcb, these pinouts were worked out directly from the pcb.
The pcb has a weird sync window, and will not work on all JAMMA setups.


08.07.04
Andy Welburn
www.andys-arcade.com



             SOLDER                              PARTS
   ________________________________|___________________________________
             Gnd               | A | 1 |          Gnd
             Gnd               | B | 2 |          Gnd
             Gnd               | C | 3 |          Gnd
                               | D | 4 |          +12v
                               | E | 5 |          -5v
                               | F | 6 |          
                               | H | 7 |          SPK +
             /Test mode        | J | 8 |          
             COIN              | K | 9 | 
             TEST ADVANCE      | L | 10|          P1 Start
                               | M | 11|          
                               | N | 12|          P1 up
                               | P | 13|          P1 down
                               | R | 14|          P1 left
             P1 right          | S | 15|          
             SYNC              | T | 16|          RED
                               | U | 17|          BLUE
                               | V | 18|          GREEN
                               | W | 19|          
                               | X | 20| 
             +5v               | Y | 21|           
                               | Z | 22|                  
        
   --------------------------------------------------------------------