Taito - The Pit Pinouts
-----------------------
by Andy Welburn
http://www.andysarcade.net
on 17/09/06

Re-typed up cos i overwrote the original document,
so the pinouts below is how i wired my adapter.

Worked out from a real pcb as the pinouts i found 
on the net did not match this pcb :


    SOLDER SIDE      PARTS SIDE
             ___________
             |  A | 1  | +5v
             |  B | 2  | +5v
             |  C | 3  | +12V
             |  D | 4  | +SPEAKER
             |  E | 5  | SYNC
             |  F | 6  | 
         RED |  H | 7  | GREEN
        BLUE |  J | 8  | GND
             |  K | 9  | 
        Coin |  L | 10 | 
             |  M | 11 | 1P start
             |  N | 12 | 1P Up
             |  P | 13 | 1P Left
             |  R | 14 | 1P Down
             |  S | 15 | 1P Right
             |  T | 16 | 1P Fire
             |  U | 17 | 
             |  V | 18 | 
             |  W | 19 | 
             |  X | 20 | 
             |  Y | 21 | GND
             |  Z | 22 | 
             ^^^^^^^^^^^

enjoy!