Taito - Moon Cresta Pinouts
---------------------------
by Andy Welburn
http://www.andysarcade.net
on a cold day 24/10/06

********INCOMPLETE - NO CONTROLS********

These were typed up from working them out from using a modified Field Goal
harness which is very close to moon cresta, on a real pcb.


    SOLDER SIDE      PARTS SIDE
             ___________
         GND |  A | 1  | GND
         GND |  B | 2  | GND
        +12V |  C | 3  | GND
    -SPEAKER |  D | 4  | +SPEAKER
         +5v |  E | 5  | +5v
        +12v |  F | 6  | +12v
         KEY |  H | 7  | KEY
             |  J | 8  | 
             |  K | 9  | 
             |  L | 10 | Speaker +
        Coin |  M | 11 | 
       Start |  N | 12 | 
             |  P | 13 | 
             |  R | 14 | 
             |  S | 15 | Video Green
   Video Red |  T | 16 | 
  Video Blue |  U | 17 | 
  Video Sync |  V | 18 | 
             ^^^^^^^^^^^

 This is like an old style connector, there is
no difference between top and bottom traces.
         ______
         |  1 | +5v
         |  2 | +5v
         |  3 | +12v
         |  4 | +12v
         |  5 | -5v
         |  6 | 
         |  7 | KEY
         |  8 |
         |  9 |
         | 10 | 
         | 11 |
         | 12 | 
         | 13 |
         | 14 | GND
         | 15 | GND
         | 16 | GND
         | 17 | GND
         | 18 | 
         ^^^^^^







enjoy!