Bootleg Bubble Bobble Pinout
----------------------------
Worked out from a real pcb, by Andrew Welburn
http://www.andysarcade.net
in the post-midnight early morning hours of 24/08/06

I had to compile this text file because the pinouts i found on the net 
do not seem to match the pcb that i wired up, so i here's what i 
came up with, and i know it works like this because i wired a pcb up 
like this and it worked ;)


    SOLDER SIDE      PARTS SIDE
             -----------
         RED |  A | 1  | GND
       GREEN |  B | 2  | GND
        SYNC |  C | 3  | 
             |  D | 4  | BLUE
             |  E | 5  | Speaker +
        +12v |  F | 6  | Speaker -
             |  H | 7  | 
             |  L | 8  | 
             |  K | 9  |
        Coin |  L | 10 |
      Start1 |  M | 11 | TILT
             |  N | 12 |
             |  P | 13 |
             |  R | 14 |
    P1 Right |  S | 15 |
     P1 Left |  T | 16 |
             |  U | 17 | N/C
             |  V | 18 | N/C 
             |  W | 19 | +5V 
             |  X | 20 | +5V
   P1 Bubble |  Y | 21 | 
     P1 Jump |  Z | 22 | 
             -----------



enjoy!