Tehkan World Cup Pinouts
------------------------
Worked out from a real pcb, by Andrew Welburn
http://www.andysarcade.net
on a dark night 09/09/06

********INCOMPLETE - NO P2 CONTROLS********

I had to compile this text file because the pinouts i found on the 
net do not seem to match the pcb that i wired up, so i here's what i 
came up with, and i know it works like this because i wired a pcb up 
like this and it worked ;)

incorrect pinouts on the net : 
http://www.powerstrike.net/Tehkan/worldcup-pinout.html


Pinouts that i confirmed :

edge connector near the sound amp :

    SOLDER SIDE      PARTS SIDE
             -----------
         GND |  A | 1  | GND
         GND |  B | 2  | GND
         +5V |  C | 3  | +5V
         +5V |  D | 4  | +5V
        +12V |  E | 5  | +12V
   Speaker - |  F | 6  | Speaker +
             |  H | 7  | P1 (Red) X clk
             |  L | 8  | P1 (Red) Y clk
             |  K | 9  |
             |  L | 10 |
             |  M | 11 |
             |  N | 12 |
    P2 Start |  P | 13 | +5v
      Coin 2 |  R | 14 | P1 Start (red team)
             |  S | 15 | Coin 1 
             |  T | 16 | 
             |  U | 17 | 
             |  V | 18 | 
             -----------


connector furthest from sound amp:

     SOLDER SIDE      PARTS SIDE
             -----------
             |  A | 1  |
             |  B | 2  |
             |  C | 3  |
             |  D | 4  |
             |  E | 5  | 
             |  F | 6  |
             |  H | 7  |
             |  L | 8  |
             |  K | 9  |
             |  L | 10 |
             |  M | 11 |
             |  N | 12 |
             |  P | 13 |
             |  R | 14 |
             |  S | 15 |
             |  T | 16 | 
         GND |  U | 17 | GND 
         GND |  V | 18 | GND
             -----------




enjoy!