Taito Super Mouse - Pinouts
^^^^^^^^^^^^^^^^^^^^^^^^^^^
Typed up by Andy Welburn
on a mild evening 31/01/2007
http://www.andys-arcade.com

One of those weird pcbs, made by Taito, with a big metal security block,
a lot like 'The Pit' and similar to Portman etc, but strangely using a 
pinout that is incredibly similar to Arkanoid... 


                           
        

    parts side      |    solder side                 Power Connector
---------------------------------------               ---------------
 ground          1  | A  ground                         ground  | 1           
 video red       2  | B  video ground                   ground  | 2
 video green     3  | C  video blue                     ground  | 3
 video sync(neg) 4  | D  N/A                            ground  | 4
 speaker (+)     5  | E  speaker (-)                    +5 VDC  | 5
 post            6  | F  post                           +5 VDC  | 6
 N/A             7  | H  N/A                            +5 VDC  | 7
 coin switch     8  | J  N/A                              N/A   | 8
 coin meter      9  | K  N/A                            +12 VDC | 9
 N/A             10 | L  N/A                              post  | 10
 serv switch     11 | M  tilt switch                    +12 VDC | 11
 1p select       12 | N  2p select                        N/A   | 12
 1p Up           13 | P  2p Up         
 1p Down         14 | R  2p Down        
 1p Right        15 | S  2p Right         
 1p Left         16 | T  2p Left        
 N/A             17 | U  N/A             
 N/A             18 | V  N/A             
 N/A             19 | W  N/A             
 N/A             20 | X  N/A             
 1p shot         21 | Y  2p shot
 N/A             22 | Z  N/A     

enjoy.