SNK Satan of Saturn - Pinouts
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Typed up by Andrew Welburn
on a rainy day 01/07/2007
http://www.andys-arcade.com


I had to put this doccie together as the pinouts 
on the net that I found did not reflect the board 
that i had hooked up.

The pinout is very similar to Vanguard and Nibbler,
but not enough to play it.

Zarzon is a renamed copy of Satan of Saturn..

It is possible that blue and green are swapped, 
currently in MAME, the game is like this, but all 
documents for pinouts i've found so far indicate 
that MAME has it wrong.. but i could be wrong, 
YMMV :)

   
          PARTS          |       SOLDER
    ---------------------+----------------------
               GND   | 1 | A |   GND
               GND   | 2 | B |   GND
               +5V   | 3 | C |   +5V
               +5V   | 4 | D |   +5V
                     | 5 | E |   
                     | 6 | F |   
                     | 7 | G |   
              COIN   | 8 | H |   
              BEAM   | 9 | I |   
          P1 START   |10 | J |   P2 START
           P1 LEFT   |11 | K |   P1 RIGHT
           P1 FIRE   |12 | L |   
                     |13 | M |   
               GND   |14 | N |   GND
               GND   |15 | O |   GND
             Green   |16 | P |   Red
              Sync   |17 | Q |   Blue
                     |18 | R |   Speaker +
              +12V   |19 | S |   +12V
              +12V   |20 | T |   +12V
               GND   |21 | U |   Speaker -
               GND   |22 | V |   GND

enjoy..

Andrew Welburn
http://www.andys-arcade.com