Game World single PCB Version of 

INVADER'S REVENGE - PINOUTS
^^^^^^^^^^^^^^^^^^^^^^^^^^^
Licensed By Zenitone Microsec


Typed up by Andrew Welburn
on a very unseasonally snowy day 22/03/2008

These pinouts were worked out from a real pcb, 
so i know they work.


   
          SOLDER         |       PARTS
    ---------------------+----------------------
                N/C  | 1 | A |   GND
          Audio (+)  | 2 | B |   GND
                N/C  | 3 | C |   GND
                N/C  | 4 | D |   GND
           1P RIGHT  | 5 | E |   N/C
            1P LEFT  | 6 | F |   1P FIRE
                     | 7 | G |   
                     | 8 | H |   2P LEFT
               COIN  | 9 | J |   Video Green
           2P START  |10 | K |   Video Blue
                     |11 | L |   Video Red
           2P RIGHT  |12 | M |   Composite Sync
               TILT  |13 | N |   1P START
            2P FIRE  |14 | P |   Compsosite video  
                +5v  |15 | Q |   +5v
                +5v  |16 | R |   +5v
                -5v  |17 | S |   -5V
                -5v  |18 | T |   -5V
               +12v  |19 | U |   +12v
               +12v  |20 | W |   +12v
               GND   |21 | X |   GND
               GND   |22 | Y |   GND

enjoy..

Andrew Welburn
http://www.andys-arcade.com